Back in the swing of things.
There’s been a few issues with my 2000 that I have needed to take care of for a while. The biggest issue being my pinion angle being a little off. I spent some time in the garage today and was able to take care of that.
Of course, while I was working on that, I found a few other things I need to take care of, so my Jeep’s probably going to be apart for a few more days.
Here’s a few pictures.
Installed RE shackles for a slightly higher lift in the rear to even it out. Getting ready to pull the axle.
Setting up the perches again after cutting them off the axle tube
Perch welded back on
Cover was leaking oil and the axle shafts need to be removed. That’s how I left it for the night.
