Cage Build (Part 2)
Day 2.
Still didn’t finish today, but hopefully sometime this week or next weekend we will. All bends are done, all tubes are notched, two sections of the cage are fully welded. Just need to weld the feet plates to the floor and finish welding the cage and paint it.
Here’s some pics from today:
almost all the bars tacked in place:
gonna also be running tube from the bottom of the a-pillar to the bottom of the b-hoop to keep them from spreading in a roll……i didn’t go at an angle from the hoop to the front since I already have the tube doors.
cutting plate with a sawzall sucks
once we knew where everything was going, we broke the tacks between the a-pillar and the b-hoop and pulled them out seperately to fuly weld……they will be easy to weld back together in the vehicle
some welding going on
grinding away herculiner sucks, too
ready to fully weld
more welding action
