Tying the rockers to the cage
After my trip to Moab and Colorado I noticed that I had hit my rockers hard enough to buckle my floor a little. So I have started working on tying the rockers and cage into the framerail.
I started out by making some wedges
The wedges will sit up against the bottom of the floor between the rocker and the framerail (which is plated with 3/16″ steel).
I will have 3 of these on each side. The front and rear ones will bolt through the floor and through the plates welded to the floor that my cage is welded to
The middle one on each side will just be welded to the rocker and framerail
Once all the wedges are welded in place, they will be covered with 3/16″ plate so the bottom is smooth and the wedges will not get caught on rocks, etc….
More pics as I progress